Models

Benchmark Model Templates

This page specifies templates for the types of models used as benchmark systems. In particular, the naming schemes established here are used in the corresponding data sets for all benchmarks. For example, $A$ always serves as the name of the component matrix applied to the state $x(t)$ in a linear time-invariant system. For all models we assume an input $u:\mathbb{ℝ}\to {\mathbb{ℝ}}^m$, with components $u_j,j=1,\dots ,m$, a state $x:\mathbb{ℝ}\to {\mathbb{ℝ}}^n$, and an output $y:\mathbb{ℝ}\to {\mathbb{ℝ}}^q$. For all parametric models, we assume each component has $\ell$ parameters; in cases where a component has fewer than $\ell$ parameters, the extras are treated as $0$. Some benchmarks (e.g., Bone Model) have a constant forcing term, in which case, it is assumed that $u(t)$ is identically $1$.

Linear Time-Invariant System

$\begin{array}{rl}E\dot{x}(t)& =Ax(t)+Bu(t),\\ y(t)& =Cx(t)+Du(t)\end{array}$

with

$E\in {\mathbb{ℝ}}^{n\times n}$, $A\in {\mathbb{ℝ}}^{n\times n}$, $B\in {\mathbb{ℝ}}^{n\times m}$, $C\in {\mathbb{ℝ}}^{q\times n}$, $D\in {\mathbb{ℝ}}^{q\times m}$.

Linear Time-Varying System

$\begin{array}{rl}E(t)\dot{x}(t)& =A(t)x(t)+B(t)u(t),\\ y(t)& =C(t)x(t)+D(t)u(t),\end{array}$

with

$E:\mathbb{ℝ}\to {\mathbb{ℝ}}^{n\times n}$, $A:\mathbb{ℝ}\to {\mathbb{ℝ}}^{n\times n}$, $B:\mathbb{ℝ}\to {\mathbb{ℝ}}^{n\times m}$, $C:\mathbb{ℝ}\to {\mathbb{ℝ}}^{q\times n}$, $D:\mathbb{ℝ}\to {\mathbb{ℝ}}^{q\times m}$.

Quadratic-Bilinear System

$\begin{array}{rl}E\dot{x}(t)& =Ax(t)+Hx(t)\otimes x(t)+\sum _{j=1}^m{N}_{j}x(t)u_j(t)+Bu(t),\\ y(t)& =Cx(t)+Du(t),\end{array}$

with

$E\in {\mathbb{ℝ}}^{n\times n}$, $A\in {\mathbb{ℝ}}^{n\times n}$, $H\in {\mathbb{ℝ}}^{n\times n^2}$, $N_j\in {\mathbb{ℝ}}^{n\times n}$, $B\in {\mathbb{ℝ}}^{n\times m}$, $C\in {\mathbb{ℝ}}^{q\times n}$, $D\in {\mathbb{ℝ}}^{q\times m}$.

Nonlinear Time-Invariant System

$\begin{array}{rl}E\dot{x}(t)& =Ax(t)+f(x(t),u(t))+Bu(t),\\ y(t)& =Cx(t),\end{array}$

with

$E\in {\mathbb{ℝ}}^{n\times n}$, $A\in {\mathbb{ℝ}}^{n\times n}$, $B\in {\mathbb{ℝ}}^{n\times m}$, $C\in {\mathbb{ℝ}}^{q\times n}$, $f:{\mathbb{ℝ}}^n\times {\mathbb{ℝ}}^m\to {\mathbb{ℝ}}^n$.

Affine Parametric Linear Time-Invariant System

$\begin{array}{rl}(E+\sum _{i=1}^{\ell }{p}_i^E{E}_i)\dot{x}(t)& =(A+\sum _{i=1}^{\ell }{p}_i^A{A}_i)x(t)+(B+\sum _{i=1}^{\ell }{p}_i^B{B}_i)u(t),\\ y(t)& =(C+\sum _{i=1}^{\ell }{p}_i^C{C}_i)x(t),\end{array}$

with

$E,E_i\in {\mathbb{ℝ}}^{n\times n}$; $A,A_i\in {\mathbb{ℝ}}^{n\times n}$; $B,B_i\in {\mathbb{ℝ}}^{n\times m}$; and $C,C_i\in {\mathbb{ℝ}}^{q\times n}$, for all $i=1,\dots ,\ell$.

Second-Order System

$\begin{array}{rl}M\ddot{x}(t)+E\dot{x}(t)+Kx(t)& =Bu(t),\\ y(t)& =C_{p}x(t)+C_v\dot{x}(t)+Du(t),\end{array}$

with

$M\in {\mathbb{ℝ}}^{n\times n}$, $E\in {\mathbb{ℝ}}^{n\times n}$, $K\in {\mathbb{ℝ}}^{n\times n}$, $B\in {\mathbb{ℝ}}^{n\times m}$, $C_p,C_v\in {\mathbb{ℝ}}^{q\times n}$, $D\in {\mathbb{ℝ}}^{q\times m}$.

When $C_v=0$, we denote $C=C_p$.

Nonlinear Second-Order System

$\begin{array}{rl}M\ddot{x}(t)+E\dot{x}(t)+Kx(t)& =Bu(t)+Ff(x(t),u(t)),\\ y(t)& =C_{p}x(t)+C_v\dot{x}(t)+Du(t),\end{array}$

with

$M\in {\mathbb{ℝ}}^{n\times n}$, $E\in {\mathbb{ℝ}}^{n\times n}$, $K\in {\mathbb{ℝ}}^{n\times n}$, $B\in {\mathbb{ℝ}}^{n\times m}$, $F\in {\mathbb{ℝ}}^{n\times n}$, $C_p,C_v\in {\mathbb{ℝ}}^{q\times n}$, $D\in {\mathbb{ℝ}}^{q\times m}$, $f:{\mathbb{ℝ}}^n\times {\mathbb{ℝ}}^m\to {\mathbb{ℝ}}^n$.

When $C_v=0$, we denote $C=C_p$.

Affine Parametric Second-Order System

$\begin{array}{rl}(M+\sum _{i=1}^{\ell }{p}_i^M{M}_i)\ddot{x}(t)+(E+\sum _{i=1}^{\ell }{p}_i^E{E}_i)\dot{x}(t)+(K+\sum _{i=1}^{\ell }{p}_i^K{K}_i)x(t)& =(B+\sum _{i=1}^{\ell }{p}_i^B{B}_i)u(t),\\ y(t)& =(C+\sum _{i=1}^{\ell }{p}_i^C{C}_i)x(t),\end{array}$

with

$M,M_i\in {\mathbb{ℝ}}^{n\times n}$; $E,E_i\in {\mathbb{ℝ}}^{n\times n}$; $K,K_i\in {\mathbb{ℝ}}^{n\times n}$; $B,B_i\in {\mathbb{ℝ}}^{n\times m}$; and $C,C_i\in {\mathbb{ℝ}}^{q\times n}$, for all $i=1,\dots ,\ell$.